-
深圳市鼎极天电子有限公司
主营：金镍测厚仪,面铜测厚仪,孔铜测厚仪 - 15814404453
深圳市鼎极天电子有限公司
主营：金镍测厚仪,面铜测厚仪,孔铜测厚仪
11
印制线路板金相切片取样机（全自动）QY-01
Automatic specimen cutting machine for micro section
Application: PCB factory physical laboratory Metrgical sample cutting (bare board)
适用范围：PCB 厂金相实验室取样用。（适用于覆铜板即没有装配元件的 PCB 板）
产品特色 Machine Features
1. 采用红外灯定位,可以更快捷的找准取样点。
This machine adopts red light positioning, and can find the sample cutting point quickly and precisely.
2. PLC 程序设计控制 ，运行稳定，操作便捷。
This machine adopts PLC control system, machine works stably and easy operating.
3. 该取样机采用钻铣方式，避免了样片变形，保证测试准确度Machine adopts drilling and routing principle to avoid sample deformation, in order to make sure the precision of the cutting.
4. 设定好取样尺寸后自动进，直至切片被完全取出
During sample cutting, when operator set the sample size, the machine will cut automatically and finish working when the micro-section is finally get out by operator.
5. 可选配安全防压装置，提高安全生产。
The infrared protection device will protect operator from wrong operation damage and protect safety.
**号：ZL 2017 2 0623298.0/ZL 2017 2 0334194.8/ZL 2017 2 0333241.7/ZL 2017 2 0333240.2/ZL 2017 3 0216045.7
参数Technical Parameter：
型号 Model | QY-01 |
控制方式 Control mode | PLC 人机 |
动力 Power | 2800W |
喉深 | 280mm |
机台尺寸 Machine dimension | 宽680*深530*高1200mm |
工作台面 Countertops | **大理石 Natural marble |
电源Power supply | 220V及110V选配 |
样品尺寸sample size | 5*5~50*50mm |
铣规格 | 直径Diameter 2.0~2.4mm 柄 3.175mm |
转数Rotate speed | 24000rpm |
操作系统Lange | 中英文切换 Chinese/English |
压力方式 Press power type | 气动平压式 Pneumatic flat pressure type |
气压 Air pressure | 0.6-0.8Mpa |
机台重量 Weight | 230kg |
安全防护Safety | 安全防压装置 Safety protection device |
消耗品 Consumable | PCB铣:更换周期80PCS左右更换一次（不同的产品洗寿命不同） PCB router bit: cutting 80pcs micro-section need change 1 router bit (different sample might affect the router bit life span) 粉尘袋 ： 建议每周清洁一次，6个月更换一个。 Dust collection bag: it is recommended to clean once a week and replace one in 6 months. |